Bevin Builder Home Safety! Getting Started Scarfing Sides, Stern, Transom Chines Nailing on the bottom Deck Beam Quarter Knees Frames Rails Foredeck Seat Risers Keel & Skeg Seats Oar Locks Painter & Oars Fill, Sand & Paint Your Pictures	Installing the Seats Kit builders- put them as shown in the plans. Use two 1 1/2 inch screws per side to secure them to the seat risers. We recommend putting a 1 1/2 x 1 1/2 inch seat post under the middle of the center seat. Just fit it so it lands in the middle of the boat- over the keel. Then, nail through the seat into the top of the post. You can put supports under the other seats, if you like.
	© 2000 Alexandria Seaport Foundation